Situation:
This document contains a list of registry values used to configure pcAnywhere versions 7.5, 8.0, 9.0, 10.0, and 10.5. Some values will already exist in the registry. If you do not find the value, you will have to enter it into the registry manually.

Solution:


Index of Registry Values

Registry Value	Located in Section
16BitAppMouseUnlock	Other settings
ConfirmComputerName	Host configuration settings
ConfirmDelete	File Transfer settings
ConfirmSend	File Transfer settings
DisableButtons	Other settings
DisplayHostInList	TCP/IP settings
DosPrint	Host configuration settings
HideRecordingButton	Remote settings
HostStartupDelay	Host settings
IPXUseNBSapMethod	IPX settings
IPXUseNonSapMethod	IPX settings
NonPCAHostTimeout	Remote settings
OnNet	Host configuration settings
OnlyOneGoodConnection	Host configuration settings
PersistentCache	Host configuration settings
Print	Remote settings
PrinterFlushTimeout	Remote settings
ProcessorMask	Host configuration settings
PromptForTCPIPHost	Remote settings
PromptIfLoggedOut	Host configuration settings
QueueSize	IPX Settings
Read queue	CAPI settings
SerialIgnoreDSR	Serial
SerialUse56000	Serial
ServiceStealthMode	Host configuration settings
SetTerminalHeight	Online service settings
ShowAltEnterMsg	Remote settings
SilentReboot	Other settings
SmartSetup	Other settings
SpeedSend Minimum Size	File Transfer settings
TCPIPBrowseDelay	TCP/IP settings
TCPIPConnectIfUnknown	TCP/IP settings
TCPIPDataPort	TCP/IP settings
TCPIPHostAdapterMode	TCP/IP settings
TCPIPHostAddressIndex	TCP/IP settings
TCPIPHostBindMode	TCP/IP settings
TCPIPMcastDataDelay	TCP/IP multicast settings
TCPIPMcastDataPort	TCP/IP multicast settings
TCPIPMcastErrorCorrect	TCP/IP multicast settings
TCPIPMcastHostNumRecvBuf	TCP/IP multicast settings
TCPIPMcastHostNumSendBuf	TCP/IP multicast settings
TCPIPMcastInterface	TCP/IP multicast settings
TCPIPMcastMTU	TCP/IP multicast settings
TCPIPMcastRemNumRecvBuf	TCP/IP multicast settings
TCPIPMcastRemNumSendBuf	TCP/IP multicast settings
TCPIPNetBroadcast	TCP/IP settings
TCPIPPortCompatibility	TCP/IP settings
TCPIPQueryInterval	TCP/IP settings
TCPIPRecvUDPBcast	TCP/IP settings
TCPIPStatusPort	TCP/IP settings
TCPIPWSDataBuf	TCP/IP settings
UseAltForMacroKeysOnly	Online service settings
UseExtendedMacroKeys	Online service settings
UseFirstTapiModem	TAPI settings
UseWinsock1	TCI/IP settings

TCP/IP settings
TCP/IP multicast settings
Serial settings
TAPI settings
IPX settings

Remote settings

Value:	HideRecordingButton
Key:	HKEY_LOCAL_MACHINE\SOFTWARE\Symantec\pcANYWHERE\CurrentVersion\Remote Control
Type:	DWORD
Settings:	0 = The Record Session button appears on the remote toolbar (Default) 1 = The Record Session button does not appear on the remote toolbar
Versions:	8.02, 9.0, 10.0, 10.5
Apply at:	Remote

Use this registry key to hide the Record Session icon from the remote session toolbar.
------------------------

Value:	PrinterFlushTimeout
Key:	HKEY_LOCAL_MACHINE\SOFTWARE\Symantec\pcANYWHERE\CurrentVersion\Remote Control
Type:	DWORD
Settings:	x = Seconds before assuming print job has completed.
Versions:	7.5, 8.0, 9.0, 10.0, 10.5
Apply at:	Remote

Use this setting if a print job is being separated into multiple jobs during remote printing. This item sets the inactivity time-out for the remote printing facility. If there is no activity on the port being captured for remote printing, pcANYWHERE32 assumes the printing job is done and will stop spooling. This may cause a print job to be separated into multiple jobs if there is a long delay during the printing. This DWORD registry item allows you to adjust the length in seconds of the inactivity on the captured port before pcANYWHERE assumes a print job has stopped spooling.

The default is 30 seconds.
------------------------

Value:	Print
Key:	HKEY_LOCAL_MACHINE\SOFTWARE\Symantec\pcANYWHERE\CurrentVersion\Remote Control
Type:	DWORD
Settings:	0 = Discard (Default) 1 = Host only 2 = Remote only 3 = Host and remote
Versions:	7.5, 8.0, 9.0, 10.0, 10.5
Apply at:	Remote

This setting specifies the default print destination when connecting to a pcANYWHERE 2.0 or 5.0 host.
------------------------

Value:	ShowAltEnterMsg
Key:	HKEY_LOCAL_MACHINE\SOFTWARE\Symantec\pcANYWHERE\CurrentVersion\Remote Control
Type:	DWORD
Settings:	0 = Do not display Full Screen Reminder Message 1 = Display the Full Screen Reminder Message (Default)
Versions:	7.5, 8.0, 9.0, 10.0, 10.5
Apply at:	Remote

This setting turns the Full Screen Reminder Message on or off.
------------------------

Value:	PromptForTCPIPHost
Key:	HKEY_LOCAL_MACHINE\SOFTWARE\Symantec\pcANYWHERE\CurrentVersion\Remote Control
Type:	DWORD
Settings:	0 = Disabled (Default) 1 = Enabled
Versions:	8.0, 9.0, 10.0, 10.5
Apply at:	Remote

This registry value allows a TCP/IP remote to specify an IP address or name when you leave the "Host To Connect To" field blank.
------------------------

Value:	NonPCAHostTimeout
Key:	HKEY_LOCAL_MACHINE\SOFTWARE\Symantec\pcANYWHERE\CurrentVersion\Remote Control
Type:	DWORD
Settings:	0 = Wait forever (Default) x = Number of seconds to wait for a pcANYWHERE host to respond
Versions:	8.0, 9.0, 10.0, 10.5
Apply at:	Remote

If pcANYWHERE host does not respond, hang up. This is useful for scripts that call systems where a modem will answer, but the pcANYWHERE host may not be running.
------------------------
CAPI settings
Host configuration settings
File Transfer settings
Other settings
Online service settings

Document ID: 1997471006
Last Modified: 03/19/2008
Date Created: 04/07/1997
Operating System(s): Windows 95, Windows 98, Windows 98SE, Windows NT 4.0, Windows 2000, Windows Me, Windows NT3.51
Product(s): pcAnywhere 10.0, pcAnywhere 10.5, pcAnywhere 11.0, pcAnywhere 11.5, pcAnywhere 12.0, pcAnywhere 9.0