Situation:
This document contains a list of registry values used to configure pcAnywhere versions 7.5, 8.0, 9.0, 10.0, and 10.5. Some values will already exist in the registry. If you do not find the value, you will have to enter it into the registry manually.

Solution:


Index of Registry Values

Registry Value	Located in Section
16BitAppMouseUnlock	Other settings
ConfirmComputerName	Host configuration settings
ConfirmDelete	File Transfer settings
ConfirmSend	File Transfer settings
DisableButtons	Other settings
DisplayHostInList	TCP/IP settings
DosPrint	Host configuration settings
HideRecordingButton	Remote settings
HostStartupDelay	Host settings
IPXUseNBSapMethod	IPX settings
IPXUseNonSapMethod	IPX settings
NonPCAHostTimeout	Remote settings
OnNet	Host configuration settings
OnlyOneGoodConnection	Host configuration settings
PersistentCache	Host configuration settings
Print	Remote settings
PrinterFlushTimeout	Remote settings
ProcessorMask	Host configuration settings
PromptForTCPIPHost	Remote settings
PromptIfLoggedOut	Host configuration settings
QueueSize	IPX Settings
Read queue	CAPI settings
SerialIgnoreDSR	Serial
SerialUse56000	Serial
ServiceStealthMode	Host configuration settings
SetTerminalHeight	Online service settings
ShowAltEnterMsg	Remote settings
SilentReboot	Other settings
SmartSetup	Other settings
SpeedSend Minimum Size	File Transfer settings
TCPIPBrowseDelay	TCP/IP settings
TCPIPConnectIfUnknown	TCP/IP settings
TCPIPDataPort	TCP/IP settings
TCPIPHostAdapterMode	TCP/IP settings
TCPIPHostAddressIndex	TCP/IP settings
TCPIPHostBindMode	TCP/IP settings
TCPIPMcastDataDelay	TCP/IP multicast settings
TCPIPMcastDataPort	TCP/IP multicast settings
TCPIPMcastErrorCorrect	TCP/IP multicast settings
TCPIPMcastHostNumRecvBuf	TCP/IP multicast settings
TCPIPMcastHostNumSendBuf	TCP/IP multicast settings
TCPIPMcastInterface	TCP/IP multicast settings
TCPIPMcastMTU	TCP/IP multicast settings
TCPIPMcastRemNumRecvBuf	TCP/IP multicast settings
TCPIPMcastRemNumSendBuf	TCP/IP multicast settings
TCPIPNetBroadcast	TCP/IP settings
TCPIPPortCompatibility	TCP/IP settings
TCPIPQueryInterval	TCP/IP settings
TCPIPRecvUDPBcast	TCP/IP settings
TCPIPStatusPort	TCP/IP settings
TCPIPWSDataBuf	TCP/IP settings
UseAltForMacroKeysOnly	Online service settings
UseExtendedMacroKeys	Online service settings
UseFirstTapiModem	TAPI settings
UseWinsock1	TCI/IP settings

TCP/IP settings
TCP/IP multicast settings

Serial settings

Value:	SerialIgnoreDSR
Key:	HKEY_LOCAL_MACHINE\SOFTWARE\Symantec\pcANYWHERE\CurrentVersion\System
Type:	DWORD
Settings:	0 = Respect DSR 1 = Ignore DSR (Default)
Versions:	7.5, 8.0, 9.0, 10.0
Apply at:	Remote, Host

Use this item for modems or other serial devices that do not initialize correctly because their DSR (Data Set Ready signal) is not initially set. It is also useful if the modem connection does not have a DSR line. This registry item forces the computer to ignore the DSR setting of the attached modem or serial device. Thus, you can get around the requirement of setting a modem's DSR high.
------------------------

Value:	SerialUse56000
Key:	HKEY_LOCAL_MACHINE\SOFTWARE\Symantec\pcANYWHERE\CurrentVersion\System
Type:	DWORD
Settings:	0 = Do not change 57,600 to 56,000 (Default) 1 = Change 57,600 to 56,000
Versions:	7.5, 8.0, 9.0, 10.0, 10.5
Apply at:	Remote, Host

NOTE: Only for Digiboards under Windows NT
Use this value when a serial connection can be made at 38,400 bps and 115,000 bps, but not at 57,600 bps. This value sets the default serial speed from 57,600 bps to 56,000 bps when you select 57,600 bps. It does not affect TAPI serial speeds.
------------------------
TAPI settings
IPX settings
Remote settings
CAPI settings
Host configuration settings
File Transfer settings
Other settings
Online service settings

Document ID: 1997471006
Last Modified: 03/19/2008
Date Created: 04/07/1997
Operating System(s): Windows 95, Windows 98, Windows 98SE, Windows NT 4.0, Windows 2000, Windows Me, Windows NT3.51
Product(s): pcAnywhere 10.0, pcAnywhere 10.5, pcAnywhere 11.0, pcAnywhere 11.5, pcAnywhere 12.0, pcAnywhere 9.0