pcAnywhere registry keys


Situation:
This document contains a list of registry values used to configure pcAnywhere versions 7.5, 8.0, 9.0, 10.0, and 10.5. Some values will already exist in the registry. If you do not find the value, you will have to enter it into the registry manually.

Solution:

Hide details for Index of Registry Values
Index of Registry Values
Registry Value
Located in Section
16BitAppMouseUnlockOther settings
ConfirmComputerNameHost configuration settings
ConfirmDeleteFile Transfer settings
ConfirmSendFile Transfer settings
DisableButtonsOther settings
DisplayHostInListTCP/IP settings
DosPrintHost configuration settings
HideRecordingButtonRemote settings
HostStartupDelayHost settings
IPXUseNBSapMethodIPX settings
IPXUseNonSapMethodIPX settings
NonPCAHostTimeoutRemote settings
OnNetHost configuration settings
OnlyOneGoodConnectionHost configuration settings
PersistentCacheHost configuration settings
PrintRemote settings
PrinterFlushTimeoutRemote settings
ProcessorMaskHost configuration settings
PromptForTCPIPHostRemote settings
PromptIfLoggedOutHost configuration settings
QueueSizeIPX Settings
Read queueCAPI settings
SerialIgnoreDSRSerial
SerialUse56000Serial
ServiceStealthModeHost configuration settings
SetTerminalHeightOnline service settings
ShowAltEnterMsgRemote settings
SilentRebootOther settings
SmartSetupOther settings
SpeedSend Minimum SizeFile Transfer settings
TCPIPBrowseDelayTCP/IP settings
TCPIPConnectIfUnknownTCP/IP settings
TCPIPDataPortTCP/IP settings
TCPIPHostAdapterModeTCP/IP settings
TCPIPHostAddressIndexTCP/IP settings
TCPIPHostBindModeTCP/IP settings
TCPIPMcastDataDelayTCP/IP multicast settings
TCPIPMcastDataPortTCP/IP multicast settings
TCPIPMcastErrorCorrectTCP/IP multicast settings
TCPIPMcastHostNumRecvBufTCP/IP multicast settings
TCPIPMcastHostNumSendBufTCP/IP multicast settings
TCPIPMcastInterfaceTCP/IP multicast settings
TCPIPMcastMTUTCP/IP multicast settings
TCPIPMcastRemNumRecvBufTCP/IP multicast settings
TCPIPMcastRemNumSendBufTCP/IP multicast settings
TCPIPNetBroadcastTCP/IP settings
TCPIPPortCompatibilityTCP/IP settings
TCPIPQueryIntervalTCP/IP settings
TCPIPRecvUDPBcastTCP/IP settings
TCPIPStatusPortTCP/IP settings
TCPIPWSDataBufTCP/IP settings
UseAltForMacroKeysOnlyOnline service settings
UseExtendedMacroKeysOnline service settings
UseFirstTapiModemTAPI settings
UseWinsock1TCI/IP settings


Show details for TCP/IP settingsTCP/IP settings
Show details for TCP/IP multicast settingsTCP/IP multicast settings
Show details for Serial settingsSerial settings
Show details for TAPI settingsTAPI settings
Show details for IPX settingsIPX settings
Show details for Remote settingsRemote settings
Show details for CAPI settingsCAPI settings
Show details for Host configuration settingsHost configuration settings
Show details for File Transfer settingsFile Transfer settings
Hide details for Other settings
Other settings

Value:
DisableButtons
Key:
HKEY_LOCAL_MACHINE\SOFTWARE\Symantec\pcANYWHERE\CurrentVersion\System
Type:
DWORD
Settings:
0 = all buttons available (Default)
1 = disable host button
2 = remote
4 = file transfer
8 = gateway
16 = online services
Versions:
9.x
Apply at:
Remote, Host

Values are decimal values. You can add values together to disable more than one button. For example, to disable online services, remote, and file transfer you would use the decimal value 22 (16+4+2).

------------------------

Value:
SilentReboot
Key:
HKEY_LOCAL_MACHINE\SOFTWARE\Symantec\pcANYWHERE\CurrentVersion\System
Type:
DWORD
Settings:
0 = Do not reboot after setup /s [DEFAULT]
1 = Reboot after setup /s
Versions:
7.52
Apply at:
Remote, Host

Reboots the computer after running SETUP /S.
------------------------
Value:
SmartSetup
Key:
HKEY_LOCAL_MACHINE\SOFTWARE\Symantec\pcANYWHERE\CurrentVersion\System
Type:
DWORD
Settings:
0 = Run the Smart Setup when pcANYWHERE32 is run for the first time [DEFAULT]
1 = Do not run Smart Setup
Versions:
7.5, 8.0
Apply at:
Remote, Host
Use this value to disable/enable the SmartSetup wizard that launches the first time you launch pcANYWHERE.
------------------------

Value:
16BitAppMouseUnlock
Key:
HKEY_LOCAL_MACHINE\SOFTWARE\Symantec\pcANYWHERE\CurrentVersion\System
Type:
DWORD
Settings:
0 = Use standard mouse code [DEFAULT]
1 = Use new mouse code
Versions:
7.5, 8.0, 9.0, 10.0, 10.5
Apply at:
Remote, Host
This setting fixes 16-bit application mouse problems.
------------------------
Show details for Online service settingsOnline service settings


Document ID: 1997471006
Last Modified: 03/19/2008
Date Created: 04/07/1997
Operating System(s): Windows 95, Windows 98, Windows 98SE, Windows NT 4.0, Windows 2000, Windows Me, Windows NT3.51
Product(s): pcAnywhere 10.0, pcAnywhere 10.5, pcAnywhere 11.0, pcAnywhere 11.5, pcAnywhere 12.0, pcAnywhere 9.0

©1995 - 2009 Symantec Corporation