Search

All of Symantec All of Symantec Support Viruses & Risks Home & Home Office Small Business Enterprise Partners VERITAS

Situation:
This document contains a list of registry values used to configure pcAnywhere versions 7.5, 8.0, 9.0, 10.0, and 10.5. Some values will already exist in the registry. If you do not find the value, you will have to enter it into the registry manually.

Solution:


Index of Registry Values

Registry Value	Located in Section
16BitAppMouseUnlock	Other settings
ConfirmComputerName	Host configuration settings
ConfirmDelete	File Transfer settings
ConfirmSend	File Transfer settings
DisableButtons	Other settings
DisplayHostInList	TCP/IP settings
DosPrint	Host configuration settings
HideRecordingButton	Remote settings
HostStartupDelay	Host settings
IPXUseNBSapMethod	IPX settings
IPXUseNonSapMethod	IPX settings
NonPCAHostTimeout	Remote settings
OnNet	Host configuration settings
OnlyOneGoodConnection	Host configuration settings
PersistentCache	Host configuration settings
Print	Remote settings
PrinterFlushTimeout	Remote settings
ProcessorMask	Host configuration settings
PromptForTCPIPHost	Remote settings
PromptIfLoggedOut	Host configuration settings
QueueSize	IPX Settings
Read queue	CAPI settings
SerialIgnoreDSR	Serial
SerialUse56000	Serial
ServiceStealthMode	Host configuration settings
SetTerminalHeight	Online service settings
ShowAltEnterMsg	Remote settings
SilentReboot	Other settings
SmartSetup	Other settings
SpeedSend Minimum Size	File Transfer settings
TCPIPBrowseDelay	TCP/IP settings
TCPIPConnectIfUnknown	TCP/IP settings
TCPIPDataPort	TCP/IP settings
TCPIPHostAdapterMode	TCP/IP settings
TCPIPHostAddressIndex	TCP/IP settings
TCPIPHostBindMode	TCP/IP settings
TCPIPMcastDataDelay	TCP/IP multicast settings
TCPIPMcastDataPort	TCP/IP multicast settings
TCPIPMcastErrorCorrect	TCP/IP multicast settings
TCPIPMcastHostNumRecvBuf	TCP/IP multicast settings
TCPIPMcastHostNumSendBuf	TCP/IP multicast settings
TCPIPMcastInterface	TCP/IP multicast settings
TCPIPMcastMTU	TCP/IP multicast settings
TCPIPMcastRemNumRecvBuf	TCP/IP multicast settings
TCPIPMcastRemNumSendBuf	TCP/IP multicast settings
TCPIPNetBroadcast	TCP/IP settings
TCPIPPortCompatibility	TCP/IP settings
TCPIPQueryInterval	TCP/IP settings
TCPIPRecvUDPBcast	TCP/IP settings
TCPIPStatusPort	TCP/IP settings
TCPIPWSDataBuf	TCP/IP settings
UseAltForMacroKeysOnly	Online service settings
UseExtendedMacroKeys	Online service settings
UseFirstTapiModem	TAPI settings
UseWinsock1	TCI/IP settings

TCP/IP settings
TCP/IP multicast settings
Serial settings
TAPI settings
IPX settings
Remote settings
CAPI settings

Host configuration settings

Value:	HostStartupDelay
Key:	HKEY_LOCAL_MACHINE\SOFTWARE\Symantec\pcANYWHERE\CurrentVersion\Host
Type:	DWORD
Settings:	number of seconds delay (e.g., 5 = 5 seconds delay)
Versions:	9.0.1, 10.0, 10.5
Apply at:	Host

Use this setting to delay the launch of your pcAnywhere 9.0 host when it is configured to launch with Windows.
------------------------

Value:	ServiceStealthMode
Key:	HKEY_LOCAL_MACHINE\SOFTWARE\Symantec\pcANYWHERE\CurrentVersion\Host
Type:	DWORD
Settings:	0 = Do not hide icon (Default) 1 = Hide icon
Versions:	7.5, 8.0, 9.0, 10.0, 10.5
Apply at:	Host

Use this setting to hide the Host Waiting icon and Waiting dialog.
------------------------

Value:	ConfirmComputerName
Key:	HKEY_LOCAL_MACHINE\SOFTWARE\Symantec\pcANYWHERE\CurrentVersion\Host
Type:	DWORD
Settings:	0 = Use Caller name (Default) 1 = Use remote's Computer name
Versions:	7.5, 8.0, 9.0, 10.0, 10.5
Apply at:	Host

This value toggles the type of information displayed when the host is prompted to confirm a connection.
------------------------

Value:	OnlyOneGoodConnection
Key:	HKEY_LOCAL_MACHINE\SOFTWARE\Symantec\pcANYWHERE\CurrentVersion\Host
Type:	DWORD
Settings:	0 = Host waits for a call after each connection (Default) 1 = Do not wait for a call after first connection
Versions:	7.5, 8.0, 9.0, 10.0, 10.5
Apply at:	Host

------------------------

Value:	DosPrint
Key:	HKEY_LOCAL_MACHINE\Software\Symantec\pcANYWHERE\CurrentVersion\Host
Type:	DWORD
Settings:	0 = Print to remote only (Default) 1 = Print to host only 2 = Print to host and remote
Versions:	8.0, 9.0
Apply at:	Host

This value is entered only when you need to change the print destination of DOS print jobs to something other than 'remote only'.
------------------------

Value:	PersistentCache
Key:	HKEY_LOCAL_MACHINE\SOFTWARE\Symantec\pcANYWHERE\CurrentVersion\Host
Type:	DWORD
Settings:	0 = Turn off the host's persistent cache 1 = Turn on the host's persistent cache
Versions:	7.5, 8.0, 9.0, 10.0, 10.5
Apply at:	Host

------------------------

Value:	OnNet
Key:	HKEY_LOCAL_MACHINE\SOFTWARE\Symantec\pcANYWHERE\CurrentVersion\Host
Type:	DWORD
Settings:	0 = Disabled (Default) 1 = Enabled
Versions:	8.0, 9.0, 10.0, 10.5
Apply at:	Host

This registry value resolves an issue where pcANYWHERE displayed the wrong host IP address when using FTP's OnNet 2.1 TCP/IP stack. When this is set to 1, pcANYWHERE32 8.0 uses the default IP address as defined by the FTP software.
------------------------

Value:	ProcessorMask
Key:	HKEY_LOCAL_MACHINE\SOFTWARE\Symantec\pcANYWHERE\CurrentVersion\Host
Type:	DWORD
Versions:	8.02, 9.0, 10.0, 10.5
Apply at:	Host

This registry value specifies which processors pcANYWHERE32 8.0 will run on. To have pcANYWHERE32 8.0 run on a specific processor, set this value according to the chart below. If you want pcANYWHERE32 8.0 to run on several specific processors, then set this value to the sum of the values below.

Value	Processor
0	All
1	1
2	2
4	3
8	4
16	5
32	6
64	7
128	8

Examples: A value of 34 (2+32) sets pcANYWHERE32 to run on the second and sixth processors. A value of 25 (1+8+16) sets pcANYWHERE32 to run on the first, fourth and fifth processors.

You will need to stop any pcANYWHERE hosts you have waiting and then stop and restart the pcANYWHERE host service before this change will take effect.------------------------

Value:	PromptIfLoggedOut
Key:	HKEY_LOCAL_MACHINE\SOFTWARE\Symantec\pcANYWHERE\CurrentVersion\Host
Type:	DWORD
Settings:	0= If "Prompt On Connection" and "Disconnect On Timeout" are checked, and the pcANYWHERE32 host is waiting at the Windows NT login, the remote user will connect. (Default) 1= If "Prompt On Connection" and "Disconnect On Timeout" are checked, and the pcANYWHERE32 host is waiting at the Windows NT login, the remote user will not connect.
Versions:	8.02, 9.0, 10.0, 10.5
Apply at:	Host

This registry value allows you to specify how pcANYWHERE32 will handle a remote connection when the pcANYWHERE32 host is waiting at the Windows NT login screen and the "Prompt On Connection" and "Disconnect On Timeout" options have been checked.
------------------------

File Transfer settings
Other settings
Online service settings

 

Document ID: 1997471006
Last Modified: 03/19/2008
Date Created: 04/07/1997
Operating System(s): Windows 95, Windows 98, Windows 98SE, Windows NT 4.0, Windows 2000, Windows Me, Windows NT3.51
Product(s): pcAnywhere 10.0, pcAnywhere 10.5, pcAnywhere 11.0, pcAnywhere 11.5, pcAnywhere 12.0, pcAnywhere 9.0

Site Index · Legal Notices · Privacy Policy · · Contact Us · Global Sites · License Agreements