Symantec.com
Partners
About Symantec
cartShopping
WelcomeProductsViruses & RisksSupportDownloadsStore
Home & Home Office
Symantec.com > Home & Home Office > Support > Knowledge Base


PRINT THIS SOLUTION PRINT THIS SOLUTION

RATE THIS SOLUTION RATE THIS SOLUTION

pcAnywhere registry keys

Situation:
This document contains a list of registry values used to configure pcAnywhere versions 7.5, 8.0, 9.0, 10.0, and 10.5. Some values will already exist in the registry. If you do not find the value, you will have to enter it into the registry manually.

Solution:

Hide details for Index of Registry Values
Index of Registry Values
Registry Value
Located in Section
16BitAppMouseUnlockOther settings
ConfirmComputerNameHost configuration settings
ConfirmDeleteFile Transfer settings
ConfirmSendFile Transfer settings
DisableButtonsOther settings
DisplayHostInListTCP/IP settings
DosPrintHost configuration settings
HideRecordingButtonRemote settings
HostStartupDelayHost settings
IPXUseNBSapMethodIPX settings
IPXUseNonSapMethodIPX settings
NonPCAHostTimeoutRemote settings
OnNetHost configuration settings
OnlyOneGoodConnectionHost configuration settings
PersistentCacheHost configuration settings
PrintRemote settings
PrinterFlushTimeoutRemote settings
ProcessorMaskHost configuration settings
PromptForTCPIPHostRemote settings
PromptIfLoggedOutHost configuration settings
QueueSizeIPX Settings
Read queueCAPI settings
SerialIgnoreDSRSerial
SerialUse56000Serial
ServiceStealthModeHost configuration settings
SetTerminalHeightOnline service settings
ShowAltEnterMsgRemote settings
SilentRebootOther settings
SmartSetupOther settings
SpeedSend Minimum SizeFile Transfer settings
TCPIPBrowseDelayTCP/IP settings
TCPIPConnectIfUnknownTCP/IP settings
TCPIPDataPortTCP/IP settings
TCPIPHostAdapterModeTCP/IP settings
TCPIPHostAddressIndexTCP/IP settings
TCPIPHostBindModeTCP/IP settings
TCPIPMcastDataDelayTCP/IP multicast settings
TCPIPMcastDataPortTCP/IP multicast settings
TCPIPMcastErrorCorrectTCP/IP multicast settings
TCPIPMcastHostNumRecvBufTCP/IP multicast settings
TCPIPMcastHostNumSendBufTCP/IP multicast settings
TCPIPMcastInterfaceTCP/IP multicast settings
TCPIPMcastMTUTCP/IP multicast settings
TCPIPMcastRemNumRecvBufTCP/IP multicast settings
TCPIPMcastRemNumSendBufTCP/IP multicast settings
TCPIPNetBroadcastTCP/IP settings
TCPIPPortCompatibilityTCP/IP settings
TCPIPQueryIntervalTCP/IP settings
TCPIPRecvUDPBcastTCP/IP settings
TCPIPStatusPortTCP/IP settings
TCPIPWSDataBufTCP/IP settings
UseAltForMacroKeysOnlyOnline service settings
UseExtendedMacroKeysOnline service settings
UseFirstTapiModemTAPI settings
UseWinsock1TCI/IP settings


Show details for TCP/IP settingsTCP/IP settings
Show details for TCP/IP multicast settingsTCP/IP multicast settings
Show details for Serial settingsSerial settings
Show details for TAPI settingsTAPI settings
Hide details for IPX settings
IPX settings

Value:
IPXUseNBSapMethod
Key:
HKEY_LOCAL_MACHINE\SOFTWARE\Symantec\pcANYWHERE\CurrentVersion\System
Type:
DWORD
Settings:
0 = Off (Default)
1 = Use alternate search method
Versions:
 8.0, 9.0, 10.0, 10.5
Apply at:
Remote

This registry value enables the SAP method of network search instead of using the bindery when making IPX connections.
------------------------
Value:
IPXUseNonSapMethod
Key:
HKEY_LOCAL_MACHINE\SOFTWARE\Symantec\pcANYWHERE\CurrentVersion\System
Type:
DWORD
Settings:
0 = OFF (Default)
1 = Use alternate search method
Versions:
 8.0, 9.0, 10.0, 10.5
Apply at:
Remote
This registry value enables the non-SAP method of network searching instead of using the bindery when making IPX connections. Its main use is to redistribute network traffic. The non-SAP method causes the remotes, instead of the hosts, to generate network traffic every minute. This can decrease network traffic where there are many servers and only a few remotes.
------------------------
Value:
QueueSize
Key:
HKEY_LOCAL_MACHINE\SOFTWARE\Symantec\pcANYWHERE\CurrentVersion\System
Type:
DWORD
Settings:
50 (hexidecimal)
Versions:
9.0, 9.0, 10.0, 10.5
Apply at:
Remote, Host
This registry value can speed up IPX performance on Windows 9x machines where you cannot run SPX.
NOTE: Using this registry value can negatively impact other protocols you may be running on you machine, making them perform more slowly. Use this value only when absolutely required.
------------------------
Show details for Remote settingsRemote settings
Show details for CAPI settingsCAPI settings
Show details for Host configuration settingsHost configuration settings
Show details for File Transfer settingsFile Transfer settings
Show details for Other settingsOther settings
Show details for Online service settingsOnline service settings

 

Available Translations:


RATE THIS SOLUTION
Was this solution helpful to you?
Yes
No
If any information was unclear, or the information you were seeking was not provided, please let us know. Your feedback will help us improve this service.

NOTE: Comments entered here will NOT recieve a personal email response.


Document ID: 1997471006
Last Modified: 03/19/2008
Date Created: 04/07/1997
Operating System(s): Windows 95, Windows 98, Windows 98SE, Windows NT 4.0, Windows 2000, Windows Me, Windows NT3.51
Product(s): pcAnywhere 10.0, pcAnywhere 10.5, pcAnywhere 11.0, pcAnywhere 11.5, pcAnywhere 12.0, pcAnywhere 9.0


Site Index · Legal Notices · Privacy Policy · · Contact Us · Global Sites · License Agreements
©1995 - 2009 Symantec Corporation