Situation:
You want to know how to install and configure RaptorMobile version 6.5.

Solution:
To install RaptorMobile 6.5:

1. Obtain RaptorMobile version 6.5 from the Raptor Firewall CD or your firewall administrator.
2. Run Setup.exe.
3. Accept all the defaults during the installation.
4. Once RaptorMobile has been installed, log on as the user name that you desire. (You can remove "Administrator" from the User name field if you want.)
5. Once you have logged in, click New.
6. In the Security Gateway (VPN Server) field, enter the IP address of the outside interface of your Raptor 6.5 Firewall/PowerVPN server, or the IP address that you received from your firewall administrator.
7. Make sure that the Raptor Server/PowerVPN Server box is checked.
8. Enter the Shared Secret that you received from your firewall administrator. The length of this Shared Secret must be at least 20 characters in length. If it is not, contact your firewall administrator because the configuration will not work.
9. Enter the Client ID that you received from your firewall administrator. This does not have to be the same as your logon user name.
10. Click OK.
11. Connect to your Firewall/PowerVPN server.

Document ID: 2001111412027047
Last Modified: 11/27/2001
Date Created: 07/18/2001
Product(s): RaptorMobile 6.x